Wallpaper ordering guide
Inorder to place an order with Magicdecor you will first need to choose a design (or upload your own photo), then enter your wall measurements, add it to your shopping cart, and then proceed to checkout.
It’s really quite simple once you get the hang of shopping in a virtual space. However, if you are a beginner, we have some basic instructions for you below.
1. Choose a Design
2. Enter Width & Height
3. Add to Cart & Checkout
4. Digital Proof & Delivery
1. Standard Walls
2. Sloped Walls
3. Multi-sloped Walls
4. Walls with doors & windows
5. Multiple walls
6. Staircases
1. The Non-Woven Mixture
2. Length of the Wallpaper
3. Remove the Air Bubbles
4. Applying the Paste
5. Repeat the process
6. Cleaning the Surface
7. Cut away excess portions
Once the application of the wallpaper is complete, remove the extra portions of the sheets from the ceiling and floor.
For removing the excess parts use a sharp knife preferably the one form our installation kit. In the end, the room should be left ventilated and should be kept at a normal temperature for 24 hours to allow the wallpaper to dry easily.
Wallpapers look perfect on the walls when the surface is smooth, clean with no unevenness and moisture on it.
The wallpaper sheets are directly pulled towards the ceiling at the time of application. They should hang straight and forcing the strips together should be avoided. If there is any problem during the application, it is better to remove the strips and reattach the sheets again if the edges do not meet.
Creating the mixture
- A bucket is used for creating the mixture.
- The package which contains the Adhesive content is poured into the bucket and Four liters of cold water is mixed into it
- The content is mixed for 30 seconds and again after 3 minutes, it is stirred.
- After 15 minutes, a final stir is given to the mixture and it is ready to use.